Polishing brush usage

- Jun 11, 2019-

Polishing brush usage

The polishing can be processed by the appropriate drilling of the bench drill, vertical drilling or stuck on the lathe and the cross-cutting machine. When processing large and bulky workpieces, it can be stuck on wind drills and hand drills. The speed is selected according to the size of the workpiece within 50-100 rpm. The vertical movement speed is about 30/min, and it is generally possible to move up and down 8~10 times. The deburring polishing tool brush should be moved or moved under the rotating condition. It is best to use a light lubricant when processing, and do not use solvents. It should not be used at high temperatures, dry, and high speeds. The deburring polishing tool brush is generally 5 to 15% larger than the diameter to be processed.

polishing brush