The role of sliding door brush
The sealing brush on the sliding door is also called the dust brush. The second is the way of the brush strip. It is placed at the overlap between the door and the door to prevent the dust. Therefore, at the time of purchase, Pay attention to the comparison. Generally speaking, the good quality brush is not only durable, but also avoids the buffering effect in the temporary collision between the door and the wall, thus preventing the sliding door from being worn and extending its service life.
Sliding doors are very convenient to use, but usually the sealing effect between the door and the door is poor. This is because the bottom wheel of a large number of sliding doors belongs to the external type, that is, the bottom wheel is attached to the side of the door bottom, and when the two doors slide To prevent the bottom wheel from colliding with another door panel, it is necessary to reserve a large space, thereby causing the gap between the two doors to be too large, thereby reducing the airtightness. Under such circumstances, it is necessary to select a built-in bearing bottom wheel with a large bearing capacity. This bottom wheel has a high technology content and can cope with various situations in the air. In addition, the quality of the sealing brush is also important, it is attached to the opposite side of the door. The good quality seal brush has a high viscosity and no fading of the bristles. When closed, the door and the door are tightly joined, so there is no need to worry about dust intrusion.