Folding Aluminium strip brush
1. The spring brush is to press the brush wire into the galvanized iron bar or stainless steel strip, and is wound into a spring shape by a machine to form a new type of brush roller. This technology is the introduction of a new brush roller from abroad.
2, the spring brush is divided into the inner winding spring brush and the outer winding spring brush in the shape as shown below.
3, the spring brush roller is used on a seamless round shaft to maintain a good density spot welding on the round shaft to form a spring brush roller with high density of the filament and not easy to drop the wire (also called winding Brush roller).
The purpose of the spring brush:
Spring brush is mainly used in coating, steel (steel plate pretreatment, steel plate galvanizing, steel plate color coating), glass cleaning and other industries, bleaching and dyeing printing and dyeing industry
Distinguish by material:
The wire material determines its use.
1. Metal wire spring brush is mainly used in steel, painting and other industries.
2, nylon wire spring brush is mainly used in cleaning, polishing of furniture wood, rust removal of color coated rolls and other industries.
The characteristics of the spring brush are introduced:
1) The spring brush mainly solves the problem that the ordinary brush roller (the brush roller which is brushed on the plastic or on other brush attachments such as nylon) cannot reach the density. (Note: Because the brushing of the plastic should take into account the firmness of the brush, it is necessary to ensure that the filament does not fall off. The density of the ordinary brush roller has a low limit; to achieve high density, the ordinary brush roller is not up to
2) Some spring brushes also have a certain gap, which is specially designed in consideration of the fact that the spring brush will fall into the brush wire and cannot be cleaned under the condition of working.