Nylon door strip brush
The extension product of the strip brush is that the brush strip is spirally wound on the processed steel shaft, and the two ends are welded and fixed, which is characterized in that the brush has a high density and does not fall off. The hollow core spring brush can be installed and replaced by the customer according to the size, and the use cost is lower. The brush shaft can be made of 45# round steel, ordinary stainless steel and 304# stainless steel. Depending on the application, the brush can be made of sisal, wool, PP wire, steel wire, stainless steel wire, copper plated wire, copper wire, abrasive wire, etc. material.
Need to pay attention to the following four questions:
1. Never wash against the brush bristles.
2. After the brush is cleaned, gently press the tissue with a tissue or a cotton pad to let the water drain, but remember not to twist the bristles, otherwise the bristles of the brush will be destroyed, and the structure of the bristles will be loose, resulting in hair loss.
3. After the brush is cleaned, the brush can be hung up and the bristles can be dried downwards.
4. To be naturally air-dried, do not blow dry with a hair dryer, and do not dry it under the sun. Otherwise, it may damage the material of the brush.
Strip brush, commonly used in industry, is generally used to block moving doors and windows, revolving doors, smooth doors, automatic doors, elevator dust, to prevent dust from entering the interior.