12in Single Head Triangle Stainless Steel Wire Brush with PP Handle

12in Single Head Triangle Stainless Steel Wire Brush with PP Handle

1. Place the studs one-half from the wall of the work area, and use a hammer to nail the studs to the bottom floor with the teeth facing the wall.
2. Fill the carpet and the subfloor with carpet glue, then align the edges of the mat with the back of the strip, do not nail.

Product Details

We have maintained good cooperative relations with other well-known brands for many years to ensure the quality of our Nylon Door Strip Brush, Mini Cup Brush, Wash Cleaning Tube Brush. We honor our core principal of Honesty in business, priority in service and will do our best to offer our customers with high quality products and excellent service. We constantly improve our services and enhance the quality of our services according to the changes of our customers' consumption habits and demand characteristics. Our vision is to use technology to create a better life for all mankind and to benefit everyone, every organization, and every community on the planet.

Steel wire Carpet brush
This is a carpet support accessory, three for a group, for fixing, also known as the tooth row assembly.
1. Place the studs one-half from the wall of the work area, and use a hammer to nail the studs to the bottom floor with the teeth facing the wall.
2. Fill the carpet and the subfloor with carpet glue, then align the edges of the mat with the back of the strip, do not nail.
3. Fix the carpet on the floor in the center of the room, leave it for 24 hours and keep the room ventilated.
4. When preparing to lay the corner, attach it to the nail strip at 3 times 3 feet of the carpet, and reserve 3 inches at the position against the wall. Then press the corner carpet to the teeth of the nail strip by hand. on.
5. Place the nails protruding from the wall into the bottom of the carpet support one inch from the wall to the carpet.
6. Use your knees to impact the carpet with the stuffing pad (this material is all natural rubber, harmless to the human body) to force the carpet and the strip of teeth. Repeat the tapping of the carpet support against the wall until the carpet is tight and tight.
7. Continue to reinforced the carpet against the strip along the entire length of the wall. Use a carpet utility knife to cut off the excess to smooth the carpet.
8. Move to the other side of the room and use a carpet spoke to spread the carpet and extend from where you just stood to the opposite side of the wall.
9. Make sure your knees are striking the carpet to hold the carpet firmly attached to the strip. Use a carpet utility knife to divide the excess part along the wall.
10. Repeat the above process on the other walls of the room and trim the excess with a carpet utility knife along the wall.
11. Place the chisel on the edge of the carpet and tap it to place the carpet under the panel. Repeat the above process for each wall.

IMG_20181213_132626_1


Our company distinguish itself in the market by it's high quality 12in Single Head Triangle Stainless Steel Wire Brush with PP Handle, unique technology and best service to our customers. We welcome you to inquire us by call or mail and hope to build a successful and cooperative relationship. The company takes 'Quality is the life of an enterprise' and 'Customer satisfaction is our honor' as the eternal goal.
Hot Tags: steel wire carpet brush, China, suppliers, manufacturers, factory, customized, wholesale, Ring Brush Spiral Coil For Seal, Circular Steel Wire Brushes, Wood Hub Brush, PP Wire Brush, Metal Steel Wire Brush, Flexible Wool Pile Strip

Inquiry

You Might Also Like