High Quality Mixed Color PP Wire Car Wheel Brush

High Quality Mixed Color PP Wire Car Wheel Brush

1. Place the studs one-half from the wall of the work area, and use a hammer to nail the studs to the bottom floor with the teeth facing the wall.
2. Fill the carpet and the subfloor with carpet glue, then align the edges of the mat with the back of the strip, do not nail.

Product Details

Our advanced product technology, mature product quality, and rich product supporting accessories will surely meet your highest demand for MINI BRUSH, Yellow Cloth Wheel With Handle, Inner Hole Brush. Our products have wide interchangeability with similar products in the international arena. Our company adheres to the core values of 'sincerity, responsibility and quality' and takes 'providing maintenance free products' as the quality goal.

Steel wire Carpet brush
This is a carpet support accessory, three for a group, for fixing, also known as the tooth row assembly.
1. Place the studs one-half from the wall of the work area, and use a hammer to nail the studs to the bottom floor with the teeth facing the wall.
2. Fill the carpet and the subfloor with carpet glue, then align the edges of the mat with the back of the strip, do not nail.
3. Fix the carpet on the floor in the center of the room, leave it for 24 hours and keep the room ventilated.
4. When preparing to lay the corner, attach it to the nail strip at 3 times 3 feet of the carpet, and reserve 3 inches at the position against the wall. Then press the corner carpet to the teeth of the nail strip by hand. on.
5. Place the nails protruding from the wall into the bottom of the carpet support one inch from the wall to the carpet.
6. Use your knees to impact the carpet with the stuffing pad (this material is all natural rubber, harmless to the human body) to force the carpet and the strip of teeth. Repeat the tapping of the carpet support against the wall until the carpet is tight and tight.
7. Continue to reinforced the carpet against the strip along the entire length of the wall. Use a carpet utility knife to cut off the excess to smooth the carpet.
8. Move to the other side of the room and use a carpet spoke to spread the carpet and extend from where you just stood to the opposite side of the wall.
9. Make sure your knees are striking the carpet to hold the carpet firmly attached to the strip. Use a carpet utility knife to divide the excess part along the wall.
10. Repeat the above process on the other walls of the room and trim the excess with a carpet utility knife along the wall.
11. Place the chisel on the edge of the carpet and tap it to place the carpet under the panel. Repeat the above process for each wall.

IMG_20181213_132626_1


We have ensured the quality of our High Quality Mixed Color PP Wire Car Wheel Brush with our excellent R&D technology coupled with perfect management system. We insist on taking scientific development as the guide, high-quality development as the support, stable development as the basis and catching up and surpassing development as the goal. With the development of Internet, our company deals with the internal affairs of the enterprise through the Internet, improves the efficiency and market reaction ability of the enterprise, so as to be more competitive.
Hot Tags: steel wire carpet brush, China, suppliers, manufacturers, factory, customized, wholesale, Plastic Car Cleaning Brush, Red Plastic Battery Brush, Hearing Aid Fine Tuning Brush, POLISHING WHEEL, CUTTON POLISHING WHEEL, Escalator Safety Brush Sealing Brush

Inquiry

You Might Also Like