Professional Plastic Wash Pot Brush of PP Handle Nylon Wire

Professional Plastic Wash Pot Brush of PP Handle Nylon Wire

1. Place the studs one-half from the wall of the work area, and use a hammer to nail the studs to the bottom floor with the teeth facing the wall.
2. Fill the carpet and the subfloor with carpet glue, then align the edges of the mat with the back of the strip, do not nail.

Product Details

We will keep on the manufacturing of Composite Seal Strip, Aluminium Holder Door Seal Brush, Ring Brush Spiral Coil For Seal, hoping to drive the overall progress of the industry with new models and technologies, and become the leader of excellence. All products undergo rigorous technical testing to ensure that customers get the best quality! 'There is no best, only better', our aim is to provide customers with high-quality services, which is also the driving force for the rapid development of us! We strongly believe that quality, innovation and customer service are what separate us from the competitors and places us at the apex of the industry. And we have gained very good comments from our customers. We often keep in touch with our customers to ensure that products and services are strictly close to the market, so as to provide customers with timely needs.

Steel wire Carpet brush
This is a carpet support accessory, three for a group, for fixing, also known as the tooth row assembly.
1. Place the studs one-half from the wall of the work area, and use a hammer to nail the studs to the bottom floor with the teeth facing the wall.
2. Fill the carpet and the subfloor with carpet glue, then align the edges of the mat with the back of the strip, do not nail.
3. Fix the carpet on the floor in the center of the room, leave it for 24 hours and keep the room ventilated.
4. When preparing to lay the corner, attach it to the nail strip at 3 times 3 feet of the carpet, and reserve 3 inches at the position against the wall. Then press the corner carpet to the teeth of the nail strip by hand. on.
5. Place the nails protruding from the wall into the bottom of the carpet support one inch from the wall to the carpet.
6. Use your knees to impact the carpet with the stuffing pad (this material is all natural rubber, harmless to the human body) to force the carpet and the strip of teeth. Repeat the tapping of the carpet support against the wall until the carpet is tight and tight.
7. Continue to reinforced the carpet against the strip along the entire length of the wall. Use a carpet utility knife to cut off the excess to smooth the carpet.
8. Move to the other side of the room and use a carpet spoke to spread the carpet and extend from where you just stood to the opposite side of the wall.
9. Make sure your knees are striking the carpet to hold the carpet firmly attached to the strip. Use a carpet utility knife to divide the excess part along the wall.
10. Repeat the above process on the other walls of the room and trim the excess with a carpet utility knife along the wall.
11. Place the chisel on the edge of the carpet and tap it to place the carpet under the panel. Repeat the above process for each wall.

IMG_20181213_132626_1


We not only will try our greatest to offer you excellent services to just about every client, but also are ready to receive any suggestion offered by our buyers for Professional Plastic Wash Pot Brush of PP Handle Nylon Wire. We have won unanimous recognition from customers with our excellent quality, stable performance, and good after-sales service. Our company maintains stringent quality assurance and control standards throughout the production process in order to ensure a consistent quality level of its products.
Hot Tags: steel wire carpet brush, China, suppliers, manufacturers, factory, customized, wholesale, Keyboard Cleaning Brush, SEALS FOR DOOR AND WINDOWS, PLASTIC BRUSH, Felt Polishing Wheel, Soft And Hard Plastic Coextrusion, Composite Seal Strip

Inquiry

You Might Also Like